Instruction manual

14
Technical Support: [e-mail] US: [phone] EU: [phone]
1
3
Check Use the following IP
address, for the IP address
enter 169.254.xx.xx (if unsure
use 169.254.2.5) Enter subnet
mask number 255.255.0.0
Click OK, then click OK again.
Highlight Internet Protocol
Version 4 (TCP/IPv4) then
click Properties
4
5
Click Start menu, go to
Control Panel >
Network and Sharing center >
Change Adapter Settings >
Local Area Connection.
Right click and choose Properties.
ii. Searching for devices
Open the NetworkHD – HDMI over IP Console and click Search in the Device list area to begin the search – a
green progress bar will illustrate process % remaining.
NETWORKHD CONSOLE CONFIGURATION