Instruction manual

5
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343
PANEL DESCRIPTION
6. Panel Description
1 1
1
1
4
4
2 2
4
2
2
5
5
7
7
3 3
5
3
3
6
6
8
Mode Switcher - Should be set to Normal mode
unless instructed by WyreStorm support
Power LED - Constantly lit red when the unit is
powered on
Link LED - Constantly lit blue when the Transmitter
and Receiver are linked
Mode Switcher - Should be set to Normal mode
unless instructed by WyreStorm support
Power LED - Constantly lit red when the unit is
powered on
Link LED - Constantly lit blue when the Transmitter
and Receiver are linked
USB3 - USB 2.0 port
USB4 - USB 2.0 port
GND - Grounding
Power - 12V / 2A DC power supply input
USB1 - USB 2.0 port
USB2 - USB 2.0 port
Ethernet - TCP/IP Connector
RS232 - Connect to a RS232 device
Audio Out - Audio break out
HDMI Out - HDMI Local By-pass Out
GND - Grounding
Power - 12V / 2A DC power supply input
USB - USB 2.0 port
Ethernet - TCP/IP Connector
HDMI IN - Connect to HDMI source
HDMI OUT - HDMI Local By-pass Out
RS232 - Connect to a RS232 device
i. NHD-IP-TX Transmitter
ii. NHD-IP-RX Receiver
1 2 3
1 2 43 5 6 7 8
1 2 4
AUDIO OUT
L
GND
R
3 5
1 2 43 5 6 7 8 9