Reference Guide

IronWare Software Release 02.8.00a for Brocade BigIron RX Series Swtches
Release Notes v 1.0 Page 37 of 40
Defect ID: DEFECT000323367
Technical Severity: Medium
Summary: IP Cache-entry is not removed until either ARP entry is removed or IP Cache entry is cleared.
Symptom: IP next-hop table may become full on the router.
Feature: IPv4 Forwarding
Function: Next Hop Table
Probability: High
Found in Release: RX 02.7.02
Service Request ID: 265521
Defect ID: DEFECT000325133 Technical Severity: Medium
Summary: Simultaneous use of IPv6 and IPv4 ACLs is not possible.
Feature: ACL
Function: IPV6
Probability: Medium
Found in Release: RX 02.7.03
Service Request ID:
Defect ID: DEFECT000321237
Technical Severity: Medium
Summary: When a stub area is configured the ‘show ip ospf border-router’ command incorrectly displays the area value.
Feature: OSPF Function: show commands
Probability: Medium
Found in Release: RX 02.7.02
Service Request ID: 262838
Defect ID: DEFECT000280574
Technical Severity: Medium
Summary: L2 ACL-based mirroring does not work correctly.
Feature: Mirroring Function: ACL Based
Probability: High
Found in Release: RX 02.7.03
Service Request ID: 241515
Defect ID: DEFECT000315502
Technical Severity: Medium
Summary: L2 registration process changed between release 2.5.00x and 2.7.02 without having backward compatibility
support in new code.
Feature: IPv4-MC PIM-SM Routing
Function: PROTOCOL
Probability: Medium
Found in Release: RX 02.7.02 Service Request ID: 249362
Defect ID: DEFECT000299437 Technical Severity: Medium
Summary: MP CPU may experience some memory leakage IN SNMP while polling snAgentTempSensorDescr
Symptom: The memory leak is happening in the GET and GET-NEXT operation for snAgentTempSensorDescr of
snAgentTempTable. Because of the unnecessary allocation of memory.
Feature: SNMP Management Function: Engine
Probability: High
Found in Release: RX 02.7.02 Service Request ID: 245942