Reference Guide

IronWare Software Release 02.8.00a for Brocade BigIron RX Series Swtches
Release Notes v 1.0 Page 39 of 40
Defect ID: DEFECT000274156
Technical Severity: Medium
Summary: Executing command "show interface slot 0" may cause a system reset.
Symptom: System may reload.
Feature: CLI Infrastructure
Function: Parser Engine
Probability: Medium
Found in Release: RX 02.7.02
Service Request ID: 238294
Where Else Fixed: PATCH: RX 02.7.02 e
Defect ID: DEFECT000271667
Technical Severity: Medium
Summary: Line Modules may reload during multicast memory request because of memory corruption. Cannot reproduce.
Symptom: Line modules may reload.
Feature: IPv4-MC PIM-SM Routing
Function: PROTOCOL
Probability: Low
Found in Release: RX 02.6.00 Service Request ID: 224751
Where Else Fixed: PATCH: RX 02.7.02 e
Defect ID: DEFECT000271887 Technical Severity: Medium
Summary: Line module stopped responding after issuing “show ip lpm count” command. Happens when ecmp routes are
present.
Symptom: Interface ports on the line module went into a down state. There was no crash.
Feature: SYSTEM
Function: Tiger HAL
Probability: Medium
Found in Release: RX 02.6.00
Service Request ID: 231524
Defect ID: DEFECT000271873 Technical Severity: Medium
Summary: The system may reload when formatting an invalid PCMCIA card.
Symptom: System may reload
Feature: SYSTEM Function: Flash memory
Probability: Low
Found in Release: RX 02.6.00
Service Request ID: 235167
Defect ID: DEFECT000283672
Technical Severity: Medium
Summary: BGP speaker does not advertise update to origin AS
Symptom: The ability to advertise eBGP update received from a router in AS <N> to a different router in AS <N> is
supported on the MLX but is currently not available on the RX.
Feature: BGP Function: BGPv4
Probability: High
Found in Release: RX 02.7.02
Service Request ID: 243183
Where Else Fixed: PATCH: RX 02.7.02 f