Release Notes

IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0 Page 18 of 46
Boot-Monitor Image Indicates the monitor image installed in the interface module’s code flash.
The image must be imlb<xxxxx>. The output displays the following
information about the image:
 Version – “2.2.1Txxy” indicates the image version number.
The “Txxy” is used by Brocade for record keeping. The “xx”
indicates the hardware type, while the “y” indicates the image
type.
 Size – The size, in bytes, of the image.
 Check sum – A unique ID for the image. If the contents of the
image change, the check sum changes also.
 Compilation date and time – The date and time that Brocade
compiled the image.
Boot Flash The model number and size of the interface module’s boot flash.
Boot-Monitor Image Indicates the boot image installed in the interface module’s boot flash.
The output displays the following information about the image:
 Version – “2.2.1Txxy” indicates the image version number.
The “Txxy” is used by Brocade for record keeping. The “xx”
indicates the hardware type, while the “y” indicates the image
type.
 Size – The size, in bytes, of the image.
 Check sum – A unique ID for the image. If the contents of the
image change, the check sum changes also.
 Compilation date and time – The date and time that Brocade
compiled the image.
FPGA Version Information
The following Images are only displayed from the show version
command:
1.
MBRIDGE Revision – The version number of the MBRIDGE
FPGA installed on the Management module for the BigIron
RX-16/8/4
2. MBRIDGE32 Revision – The version number of the
MBRIDGE32 FPGA installed on the Management module for
the BigIron RX-32.
3. SBRIDGE Revision – The version number of the SBRIDGE
FPGA installed on the BigIron RX-32 Switch Fabric modules.