Quick Start Manual

Dell PowerConnect B-Series TI24X Hardware Installation Guide 43

53-1002265-01

Replacing a power supply

Installing an AC power supply

NOTE

If the empty power supply bay has a cover plate, remove it as shown below before continuing.

FIGURE 17 Releasing the cover plate

FIGURE 18 Removing the cover plate

1. Remove the new power supply from its packaging.

2. Hold the handle on the front panel of the power supply with one hand and ensure that the

alignment pin on the right side of the power supply is correctly aligned. With the other hand,

support the underside of the power supply, and insert the power supply into the empty power

supply slot.