Owner's Manual

118 Default Settings
RAM logging Enabled (Severity level: debug and above)
Persistent (FLASH) logging Disabled
DNS Enabled (No servers configured)
SNMP Enabled (SNMPv1)
SNMP Traps Enabled
Auto Configuration Enabled
Auto Save Disabled
Stacking (PCM6220, PCM6348, and
PCM8024-k)
Enabled
Nonstop Forwarding on the Stack
(PCM6220, PCM6348, and PCM8024-k)
Enabled
sFlow Enabled
ISDP Enabled (Versions 1 and 2)
RMON Enabled
TACACS+ Not configured
RADIUS Not configured
SSH/SSL Disabled
Telnet Enabled
Denial of Service Protection Disabled
Captive Portal Disabled
Dot1x Authentication (IEEE 802.1X) Disabled
MAC-Based Port Security All ports are unlocked
Access Control Lists (ACL) None configured
IP Source Guard (IPSG) Disabled
DHCP Snooping Disabled
Dynamic ARP Inspection Disabled
Protected Ports (Private VLAN Edge) None
Table 6-1. Default Settings (Continued)
Feature Default