Owner's Manual

838 Configuring Data Center Bridging Features
Default DCB Values
Table 29-2 lists the default values for the DCB features that this chapter
describes.
DCBx Allows DCB devices to exchange configuration information, using
type-length-value (TLV) information elements over LLDP, with
directly connected peers.
FIP Snooping Inspects and monitors FIP frames and applies policies based upon
the L2 header information in those frames
Table 29-2. Default Port-Based Traffic Control Values
Feature Default
PFC (PCM8024-k only) Disabled, no priority classifications are
configured.
DCBx version Auto detect
FIP snooping Disabled globally and on all VLANs
FC map value 0x0efc00
FIP snooping port mode Host facing (not FCF facing)
Table 29-1. Data Center Features (Continued)
Feature Description