Owner's Manual

Hardware Overview 95
XFP Module Port LEDs (PowerConnect M6220 Only)
The XFP connectors are on the XFP module when it is inserted in the
PowerConnect M6220. Table 3-5 contains XFP port LED definitions.
Table 3-4. 10GBase-T Module Definitions
LED Color Definition
Link/Speed Solid Green The link is operating at 10 Gbps.
Solid Yellow The link is operating at a speed other
than 10 Gbps.
Off No link.
Act Blinking Green Activity.
Off No activity.
Wrong Bay
(PCM6220
Only)
Solid Red Module is in the wrong bay.
NOTE: On the PowerConnect M6220, the module must be inserted into Bay 2 to
operate. When the module is inserted into Bay 1, it will not operate and the
Wrong Bay LED is solid red.
Table 3-5. XFP Port LEDs Definitions
LED Color Definition
XFP Green The port is linked.
Green blinking The port is sending and/or receiving network
traffic.
Off The port is not linked.