Specifications

4.4.3 OP-STOP
MIB Entry: Current Operation Expected Stop-time
Index: 2.2.2
Label: OP-STOP
Description: OP-STOP reports the scheduled or expected end-time of the cur-
rent operation. This MIB entry is not valid if the current operation
(as reported by MIB 2.1 Operation Type) is “Idle”, or “Down”. If
Operation Type is “Copy”, or “Dump”, this entry will represent an
estimation of completion time, and as such may not be accurate
until average transfer rates have been determined.
Response Format: <Stop MJD>’<Stop MPM>
Response Element Type and Size Description
Stop MJD (ASCII-6-#) MJD at which the operation will end.
Stop MPM (ASCII-9-#) MPM at which the operation will end.
4.4.4 OP-REFERENCE
MIB Entry: Current Operation Reference Number
Index: 2.3
Label: OP-REFERENCE
Description: OP-REFERENCE reports the reference number of the command
message which initiated or scheduled the current operation. This
MIB entry is not valid if the current operation (as reported by MIB
2.1 Operation Type) is “Idle”.
Response Format: <Reference Number>
Response Element Type and Size Description
Reference Number (ASCII-9-#) Reference number of the command message which ini-
tiated or scheduled the current operation.
4.4.5 OP-ERRORS
MIB Entry: Current Operation Error Count
Index: 2.4
Label: OP-ERRORS
Description: OP-ERRORS reports the number of errors and warnings generated
during the current operation. This is valid if the current operation
(as reported by MIB 2.1 Operation Type) is “Copy”, “Dump”, or
“Synchronize”.
Response Format: <Errors>’<Warnings>
Response Element Type and Size Description
Errors (ASCII-15-#) Number of errors detected in the current operation.
Warnings (ASCII-15-#) Number of warnings detected in the current operation.
12