Specifications

4.4.6 OP-TAG

MIB Entry: Current Operation File Tag

Index: 2.5.1

Label: OP-TAG

Description: OP-TAG reports the tag value used to identify the ﬁle in use by

current operation. The ﬁle may be in read or write mode, de-

pending on whether the current operation (as reported by MIB 2.1

Operation Type) is “Record”, “Copy”, or “Dump”. This MIB entry

is not valid if the current operation is “Idle”, “Initialize”, “Down”,

or “Synchronize”.

Response Format: <Tag>

Response Element Type and Size Description

Tag (ASCII-16-A) Filename tag in use by the current operation; They

are <MJD>_<Reference Number>–including the literal

underscore.

4.4.7 OP-FORMAT

MIB Entry: Current Operation File Data Format

Index: 2.5.2

Label: OP-FORMAT

Description: OP-FORMAT reports the data format in use current operation.

If the operation type as reported by MIB 2.1 Operation Type is

“Record”, then Data Format is the format which the MCS-DR

is currently recording. If the operation type is “Copy”, “Dump”,

then this MIB entry is the data format speciﬁed by the “REC”

command which initiated or scheduled the recording. For all other

operation types, this entry is invalid.

Response Format: <Data Format>

Response Element Type and Size Description

Data Format (ASCII-32-A) Data format in use. See the “REC” control command

for more information on data formats.