CLI Reference Guide

show image version
Description
Display the current system image version on both partition 0 and 1.
Syntax
No parameters.
Example
The following example shows that the controller is running ArubaOS 3.4 and booting off partition 0:0.
(host) #show image version
----------------------------------
Partition : 0:0 (/dev/hda1) **Default boot**
Software Version : AOS-W 3.3.2.0
Build number : 18661
Label : 18661
Built on : 2008-06-12 04:24:34 PDT
----------------------------------
Partition : 0:0 (/dev/hda1)
Software Version : AOS-W 3.3.2.0
Build number : 18661
Label : 18661
Built on : 2008-06-12 04:24:34 PDT
The output of this command includes the following parameters:
Parameter Description
Partition
Partition number and name. The default boot partition will display a **Default boot**
notice by the partition name.
Software Version
Version of ArubaOS software running on the partition.
Build number
Build number for the software version.
Label
The label parameter can display additional information for the build. By default, this
value is the software build number.
Built on
Date the software build was created.
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on local and master
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show image version | 1035