CLI Reference Guide

1050 | show interface port-channel Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
InMcastPkts
Number of multicast packets received through the port.
InBcastPkts
Number of broadcast packets received through the port.
OutOctets
Number of octets sent through the port.
OutUcastPkts
Number of unicast packets sent through the port.
OutMcastPkts
Number of multicast packets sent through the port.
OutBcastPkts
Number of broadcast packets sent through the port.
#show interface port-channel 0 untrusted-vlan
Name: FE1/0
Untrusted Vlan(s)
The output of this command includes the following parameters:
Parameter Description
Name
Name of the specified port.
Untrusted Vlan(s)
List of untrusted VLANs.
#show interface port-channel 0 xsec
xsec vlan 7 is ACTIVE
The output of this command includes the following parameters:
Parameter Description
xsec vlan 7 is
ACTIVE
This states that xsec is active on the specified port as well as the associated VLAN.
Command History
Release Modification
ArubaOS 3.4.1 Modified to display LACP when applicable.
ArubaOS 3.0. Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master controllers