CLI Reference Guide

ap-name
ap-name <name>
ap-system-profile <profile>
authorization-profile <profile>
clone <profile>
dot11a-radio-profile <profile>
dot11a-traffic-mgmt-profile <profile>
dot11g-radio-profile <profile>
dot11g-traffic-mgmt-profile <profile>
enet0-profile <profile>
enet1-profile <profile>
event-thresholds-profile <profile>
exclude-mesh-cluster-profile-ap <profile>
exclude-virtual-ap <profile>
ids-profile <profile>
mesh-cluster-profile <profile> priority <priority>
mesh-radio-profile <profile>
no ...
regulatory-domain-profile <profile>
rf-optimization-profile <profile>
snmp-profile <profile>
virtual-ap <profile>
voip-cac-profile <profile>
Description
This command configures a specific AP.
Syntax
Parameter Description Default
<name>
Name that identifies the AP. By default, an AP’s name can either be
the AP’s Ethernet MAC address, or if the AP has been previously
provisioned with an earlier version of ArubaOS, a name in the format
<building>.<floor>.<location>. The name must be 1-63 characters.
NOTE: You cannot use quotes (“) in the AP name.
—
ap-system-profile
Configures AP administrative operations, such as logging levels. See
"ap system-profile" on page 155.
“default”
authorization-profile
Restrictive group for unauthorized AP. —
clone
Name of an existing AP name from which profile names are copied. —
dot11a-radio-profile
Configures 802.11a radio settings for the AP group; contains the ARM
profile. See "rf dot11a-radio-profile" on page 519.
“default”
dot11a-traffic-mgmt-profile
Configures bandwidth allocation. See "wlan traffic-management-
profile" on page 1508.
—
dot11g-radio-
profile
Configures 802.11g radio settings for the AP group; contains the ARM
profile. See "rf dot11a-radio-profile" on page 519.
“default”
dot11g-traffic-
Configures bandwidth allocation. See "wlan traffic-management- —
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ap-name | 107