CLI Reference Guide

ap-rename
ap-rename {ap-name <name>|serial-num <num>|wired-mac <macaddr>} <new-name>
Description
This command changes the name of an AP to the specified new name.
Syntax
Parameter Description
ap-name
Current name of the AP.
serial-num
Serial number of the AP.
wired-mac
MAC address of the AP.
<new-name>
New name for the AP. The name must be 1-63 characters.
NOTE: You cannot use quotes (“) in the AP name.
Usage Guidelines
An AP name must be unique within your network.
NOTE: This command automatically reboots the AP.
Example
The following command renames an AP:
(host) (config) #ap-rename wired-mac 00:0f:1e:11:00:00 building3-lobby
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ap-rename | 111