CLI Reference Guide

1154 | show master-redundancy Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show master-redundancy
show master-redundancy
Description
Display the master controller redundancy configuration.
Syntax
No parameters.
Example
This example below shows the current master redundancy configuration, including the ID number of the master
VRRP virtual router and the IP address of the peer controller for master redundancy.
(host) #show master-redundancy
Master redundancy configuration:
VRRP Id 2 current state is MASTER
Peer's IP Address is 2.1.1.4
Related Commands
Command Description
master-redundancy master-vrrp
This command associates a VRRP instance with master controller redundancy.
vrrp
This command configures the Virtual Router Redundancy Protocol (VRRP).
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master controllers.