Manualshelf

CLI Reference Guide

ManualsBrandsDell ManualsComputer equipmentPowerConnect W-6000
1341134213431344134513461347134813491350
1350 | show whitelist-db cpsec-master-switch-list Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show whitelist-db cpsec-master-switch-list
show cpsec-master-ctlr-list-db cpsec
show whitelist-db cpsec-master-switch-list [mac-address <mac-address>]
Description
Display the master switch list whitelist on local controllers with APs using the control plane security feature.
Syntax
Parameter Description
mac-address <mac-address>
MAC address of the master controller.
Usage Guidelines
When you use the control plane feature on a network with both master and local controllers, each local controller has
a master switch whitelist which contains the IP and MAC addresses of its master controller. If your network has a
redundant master controller, then this whitelist will contain more than one entry.
To view information for a single master controller, use the command show whitelist-db cpsec-master-switch-list
mac-address <mac-address>. To view a list of all master controllers, use the command show whitelist-db cpsec-
master-switch-list.
Example
The following command shows that the local controllers have a single master controller with the IP address 10.3.53.3:
(host) #show whitelist-db cpsec-master-list
Registered Master Switch Details
------------------------------------
MAC-Address IP-Address Sequence Number Remote Sequence Number NULL Update Count
----------- ---------- --------------- ---------------------- -----------------
00:0b:86:61:21:c8 10.3.53.3 1 3 0
Whitelist Entries: 1
The output of this command includes
Syntax
Parameter Description
MAC-Address
MAC address of the master controller.
IP-Address
IP address of the master controller.
Sequence Number
The number of times the master controller in the whitelist received and acknowledged a
campus AP whitelist change from the local controller. In the example above, the master
controller received and acknowledged one campus AP whitelist change from the local
controller.
Remote Sequence
The number of times that the local controller has received and acknowledged a campus