CLI Reference Guide

Examples
(host) #show wlan tsm-req-profile default
TSM Report Request Profile "default"
------------------------------------
Parameter Value
--------- -----
Request Mode for TSM Report Request normal
Number of repetitions 65535
Duration Mandatory Enabled
Randomization Interval 0
Measurement Duration 25
Traffic ID 96
Bin 0 Range 200
The output of this command includes the following information:
Parameter Description
Request mode for TSM
Report Request
Shows the request mode for the Transmit Stream/Category Measurement Request frame.
Number of repe-
titions
Shows the "Number of Repetitions" field in the TransmitStream/Category Measurement
Request frame.
Duration Mandatory
Shows the "Duration Mandatory" bit of the Measurement Request Mode field of the Transmit
Stream/Category Measurement Request frame.
Randomization Inter-
val
Shows the Randomization Interval field in the Transmit Stream/Category Measurement
Request frame.
Measurement Duration
Shows the Measurement Duration field in the Transmit Stream/Category Measurement
Request frame.
Traffic ID
Shows the Traffic Identifier field in the Transmit Stream/Category Measurement Request
frame.
Bin 0 Range
Shows the 'Bin 0 Range' field in the Transmit Stream/Category Measurement Request frame.
Command History
This command is introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show wlan tsm-req-profile | 1373