CLI Reference Guide

1380 | show wlan voip-cac-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
VoIP Call Admission Control
Shows if the profile enables or disables WiFi VoIP Call
Admission Control features.
VoIP Bandwidth based CAC
Shows the desired call admission control (CAC) Mechanism:
l Disable - CAC is based on Call Counts
l Enable - CAC should be based on Bandwidth.
VoIP Call Capacity
Number of simultaneous calls that can be handled by one
radio.
VoIP Bandwidth Capacity (kbps)
The maximum bandwidth that can be handled by one radio, in
kbps.
VoIP Call Handoff Reservation
Percentage of call capacity reserved for mobile VoIP clients on
call.
VoIP Send SIP 100 Trying
Shows if the profile enables or disables sending of SIP 100 -
trying messages to a call originator to indicate that the call is
proceeding.
VoIP Disconnect Extra Call
If enabled, the controller disconnects calls that exceed the high
capacity threshold by sending a deauthentication frame.
VOIP TSPEC Enforcement
Shows if the profile enables or disables validation of TSPEC
requests for CAC.
VOIP TSPEC Enforcement Period
Maximum time for the station to start the call after the TSPEC
request
VoIP Drop SIP Invite and send status
code (client)
Display the status code sent back to the client if the profile is
configured to drop a SIP Invite:
l 480: Temporary Unavailable
l 486: Busy Here
l 503: Ser vice Unavailable
l none: Don't send SIP status code
VoIP Drop SIP Invite and send status
code (server)
Display the status code sent back to the server if the profile is
configured to drop a SIP Invite:
l 480: Temporary Unavailable
l 486: Busy Here
l 503: Ser vice Unavailable
l none: Don't send SIP status code
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers.