CLI Reference Guide

usb reclassify
crypto-local
usb reclassify <address>
Description
Disconnect and reclassify an USB device.
Syntax
Parameter Description
<address>
USB device address from the show usb command.
Usage Guidelines
There's no way to power off an USB port on the W-600 series controller, but you can re-initialize the device using
the usb reclassify command. This command removes the modem from the USB device list, then detects it via the
USB table.
Command History
Introduced in ArubaOS 3.4.
Command Information
Platforms Licensing Command Mode
W-600 series controllers Base operating system Config mode on master and local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide usb reclassify | 1437