CLI Reference Guide

whitelist-db cpsec-master-switch-list
whitelist-db cpsec-master-switch-list
del mac-address <mac-address>
purge
Description
Delete a master controller from the master switch whitelist.
Syntax
Parameter Description
del mac-address <mac-address>
Remove a single master controller from the master switch whitelist.
purge
Clear all entries from the master switch whitelist
Usage Guidelines
Each local controller using the control plane security feature has a master switch whitelist which contains the IP and
MAC addresses of its master controller. If your network has a redundant master controller, then this whitelist will
contain more than one entry.
The master switch whitelist rarely needs to be purged. Although you can delete an entry from the master switch
whitelist, you should do so only if you have removed a master switch from the network. Deleting a valid master
controller from the master switch whitelist can cause errors in your network.
Example
The following command removes a master controller from the master switch whitelist
(host) (config) #whitelist-db cpsec-master-switch-list del mac-address 00:1E:33:CA:D2:51
Related Commands
Command Description Mode
show whitelist-db cpsec-master-switch-
list
Show the master switch whitelist for the control plane
feature.
Enable mode
Command History
Version Modification
ArubaOS 5.0 Command introduced
ArubaOS 6.0 The cpsec-master-ctrlr-list parameter was modified to cpsec-master-switch-list
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide whitelist-db cpsec-master-switch-list | 1475