CLI Reference Guide

ap remove-r1-key
ap remove-r1-key <sta-mac>
[ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr>]
Description
This command removes the r1 key from an AP.
Syntax
Parameter Description
<sta-mac> MAC address of the client.
ap-name <ap-name> Name of the AP.
bssid <bssid> BSSID of the AP.
ip-addr <ip-addr> IP address of the AP.
Usage Guidelines
Use this command to remove an r1 key from an AP when the AP does not have a cached r1 key during Fast BSS
Transition roaming.
Examples
The following command configures the regulatory domain profile for APs in Japan:
(host) #ap remove_r1_key 00:50:43:21:01:b8 ap-name MAcage-105-GL
Execute the following command to check if the r1 key is removed from the AP:
(host) #show ap remote debug r1_key ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC Mobility Domain ID Validity Duration R1 Key
----------- ------------------ ----------------- ------
Related Commands
To check if the r1 key is removed from an AP, use the show ap remote debug r1_key command:
Command History
Introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ap remove-r1-key | 149