CLI Reference Guide

aaa authentication captive-portal
aaa authentication captive-portal <profile>
auth-protocol mschapv2|pap|chap
black-list <black-list>
clone <source-profile>
default-guest-role <role>
default-role <role>
enable-welcome-page
guest-logon
ip-addr-in-redirection <ipaddr>
login-page <url>
logon-wait {cpu-threshold <percent>}|{maximum-delay <seconds>}|{minimum-delay <seconds>}
logout-popup-window
max-authentication-failures <number>
no ...
protocol-http
proxy host <ipaddr> port <port>
redirect-pause <seconds>
redirect-url <url>
server-group <group-name>
show-acceptable-use-policy
show-fqdn
single-session
switchip-in-redirection-url <ipaddr>
user-logon
user-vlan-in-redirection-url <vlan>
welcome-page <url>
white-list <white-list>
Description
This command configures a Captive Portal authentication profile.
Syntax
Parameter Description Range Default
<profile>
Name that identifies an instance of the
profile. The name must be 1-63 characters.
— “default”
authentication-protocol
mschapv2|pap|chap
This parameter specifies the type of authen-
tication required by this profile, PAP is the
default authentication type
mschapv2
pap
chap
pap
black-list
Name of an existing black list on an IPv4 or
IPv6 network destination. The black list
contains websites (unauthenticated) that a
guest cannot access.
Specify a netdestination host or subnet to
add that netdestination to the captive portal
blacklist.
If you have not yet defined a netdestination,
use the CLI command netdestination to
define a destination host or subnet before
—
—
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide aaa authentication captive-portal | 15