CLI Reference Guide

16 | aaa authentication captive-portal Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description Range Default
you add it to the blacklist.
NOTE: This parameter requires the Public
Access license.
clone
Name of an existing Captive Portal profile
from which parameter values are copied.
— —
default-guest-role
Role assigned to guest. — guest
default-role <role>
Role assigned to the Captive Portal user
when that user logs in. When both user and
guest logons are enabled, the default role
applies to the user logon; users logging in
using the guest interface are assigned the
guest role.
— guest
enable-welcome-
page
Displays the configured welcome page
before the user is redirected to their original
URL. If this option is disabled, redirection to
the web URL happens immediately after the
user logs in.
enabled/
disabled
enabled
guest-logon
Enables Captive Portal logon without
authentication.
enabled/
disabled
disabled
switchip-in-redirection-url
<ipaddr>
Sends the controller’s interface IP address in
the redirection URL when external captive
portal servers are used. An external captive
portal server can determine the controller
from which a request originated by parsing
the ‘switchip’ variable in the URL. This
parameter requires the Public Access
license.
— —
login-page <url>
URL of the page that appears for the user
logon. This can be set to any URL.
— /auth/index.
html
logon-wait
Configure parameters for the logon wait
interval.
1-100 60%
cpu-threshold <percent>
CPU utilization percentage above which the
logon wait interval is applied when
presenting the user with the logon page.
1-100 60%
maximum-delay <seconds>
Maximum time, in seconds, the user will
have to wait for the logon page to pop up if
the CPU load is high. This works in
conjunction with the Logon wait CPU
utilization threshold parameter.
1-10 10 seconds
minimum-delay <seconds>
Minimum time, in seconds, the user will
have to wait for the logon page to pop up if
the CPU load is high. This works in
conjunction with the Logon wait CPU
utilization threshold parameter.
1-10 5 seconds
logout-popup-
window
Enables a pop-up window with the Logout
link that allows the user to log out. If this
enabled/
disabled
enabled