CLI Reference Guide

180 | clear Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
l wired-mac
ip
Clears all IP information from DHCP bindings, IGMP groups and IP mobility
configuration. Use the following parameters:
l dhcp
l igmp
l mobile
ipc
Clears all inter process communication statistics.
ipv6
Clears all IPv6 session statistics, multicast listener discovery (MLD) group and member
information, MLD statistics, and counters. Use the following parameters:
l datapath session counters
l mld group
l mld stats-counters
loginsession
Clears loginsession information for a specific login session, as identified by the session
id.
master-local-entry
Clears local controller information from the master controller LMS list. Specify the IP
address of the local controller to be removed from master controller active LMS list.
master-local-session
Clear and reset master local TCP connection. Specify the IP address of either the master
or local controller.
port
Clear all port statistics that includes link-event counters or all counters. Use the
following parameters:
l link-event
l stats
provisioning-ap-list
Clear AP entries from the provisioning list.
provisioning-params
Clear provisioning parameters and reset them to the default configuration values.
rap-wml
Clear wired MAC lookup cache for a DB server.
update-counter
Clear all update counter statistics.
voice
Clear all voice state information. Use the following parameters:
l call-counters
l call-status
l statistics
n cac
n tspec-enforcement
vpdn
Clear all VPDN configuration for L2TP and PPTP tunnel. Use the following parameters:
l tunnel l2tp id <l2tp-tunnel-id>
l tunnel pptp id <pptp-tunnel-id>
wms
Clear all WLAN management commands. Use the following parameters:
l ap—clear all AP related commands. Specify the BSSID of the AP.
l client—clear all wired client related commands. Specify the MAC address of the
client.
l probe—clear all probe information. Specify the BSSID of the probe.