CLI Reference Guide

exit
exit
Description
This command exits the current CLI mode.
Syntax
No parameters.
Usage Guidelines
Upon entering this command in a configuration sub-mode, you are returned to the configuration mode. Upon
entering this command in configuration mode, you are returned to the enable mode. Upon entering this command in
enable mode, you are returned to the user mode. Upon entering this command in user mode, you are returned to the
user login.
Example
The following sequence of exit commands return the user from the interface configuration sub-mode to the user
login:
(host) (config-if) #exit
(host) (config) #exit
(host) #exit
(host) >exit
User:
Command History
Introduced in ArubaOS 3.0
Command Information
Platform License Command Mode
Available on all platforms Available in the base
operating system
Available in the following command modes:
l User
l Enable
l Config
l Config sub-modes
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide exit | 261