CLI Reference Guide

Parameter Description Range Default
detect-valid-ssid-misuse
Enable/disable detection of Interfering or Neighbor
APs using valid/protected SSIDs.
— disable
detect-windows-bridge
Enables detection of Windows station bridging. — true
detect-wireless-bridge
Enables detection of wireless bridging. — false
detect-wireless-hosted-network
If enabled, this feature can detect the presence of a
wireless hosted network.
When a wireless hosted network is detected this
feature sends a “Wireless Hosted Network”
warning level security log message and the
wlsxWirelessHostedNetworkDetected SNMP trap.
If there are clients associated to the hosted
network, this feature will send a “Client Associated
To Hosted Network” warning level security log
message and the
wlsxClientAssociatedToHostedNetworkDetected
SNMP trap.
— enable
mac-oui-quiet-time
Time, in seconds, that must elapse after an invalid
MAC OUI alarm has been triggered before another
identical alarm may be triggered.
60-
360000
sec-
onds
900
seconds
no
Negates any configured parameter. — —
oui-classification
Enable/disable OUI based rogue AP classification — enable
overlay-classification
Enable/disable overlay rogue AP classification — enable
privacy
Enables encryption as a valid AP configuration. — false
prop-wm-classification
Enable/disable rogue AP classification through
propagated wired MACs
— true
protect-adhoc-enhanced
Enables advanced protection from adhoc networks,
including adhoc networks in open mode. When
enhanced adhoc containment is carried out, a new
repeatable event, syslog and SNMP trap will be
generated for each containment event.
— false
protect-adhoc-network
Enables protection from adhoc networks. When
adhoc networks are detected, they are disabled
using a denial of service attack.
— false
protect-high-throughput
Enables or disables protection of high-throughput
(802.11n) devices.
— false
protect-ht-40mhz
Enables or disables protection of high-throughput
(802.11n) devices operating in 40 MHz mode.
— false
protect-misconfigured-ap
Enables protection of misconfigured APs. — false
protect-ssid
Enables use of SSID by valid APs only. — false
protect-valid-sta
When enabled (true), does not allow valid stations
to connect to a non-valid AP.
— false
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide ids unauthorized-device-profile | 307