CLI Reference Guide

368 | ip mobile domain Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ip mobile domain
ip mobile domain <name>
description <description>
hat <subnetwork> <mask> <vlan> <ha-ipaddr> <desc>
no ...
Description
This command configures the mobility domain on the controller.
Syntax
Parameter Description
domain
Name of the mobility domain.
description
Description of the mobility domain.
hat
Configures a home agent table (HAT) entry.
<subnetwork>
Subnet that requires mobility service.
<mask>
Netmask for the IP address.
<vlan>
VLAN ID. The VLAN ID must be the VLAN number on the home agent. The supported range of
VLAN IDs is 1-4096..
<ha-ipaddr>
IP address of the home agent.
<desc>
Description of a HAT entry. The description can be a maximum of 30 characters (including
spaces).
no
Negates any configured parameter.
Usage Guidelines
You configure the HAT on a master controller; the mobility domain information is pushed to all local controllers
that are managed by the same master.
HAT entries map subnetworks or VLANs and the home agents. The home agent is typically the controller’s IP
address. The home agent’s IP address must be routable; that is, all controllers that belong to the same mobility
domain must be able to reach the home agent’s IP address.
The controller looks up information in the HAT to obtain the IP address of the home agent for a mobile client.
Because there can be multiple home agents on a subnetwork, the HAT can contain more than one entry for the same
subnetwork.
Example
The following command configures HAT entries:
(host) (mobility-domain) #ip mobile domain east_building
(host) (mobility-domain) #hat 10.11.1.0 255.255.255.0 120 10.11.1.200 description "East
building entries"
(host) (mobility-domain) #show ip mobile domain east_building
Mobility Domains:, 1 domain(s)