CLI Reference Guide

378 | ip name-server Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
ip name-server
ip name-server <ipaddr>
Description
This command configures servers for name and address resolution.
Syntax
Parameter Description
<ip-addr>
IP address of the server.
Usage Guidelines
You can configure up to six servers using separate commands. Specify one or more servers when you configure a
default domain name (see "ip domain-name" on page 363).
Example
The following command configures a name server:
ip name-server 10.1.1.245
Command History
This command was available in ArubaOS 3.0.
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system. Config mode on master controllers