CLI Reference Guide

aaa authentication stateful-dot1x
aaa authentication stateful-dot1x
default-role <role>
enable
no ...
server-group <group>
timeout <seconds>
Description
This command configures 802.1X authentication for clients on non-Dell APs.
Syntax
Parameter Description Range Default
default-role <role>
Role assigned to the 802.1X user upon login.
NOTE: The PEFNG license must be installed.
— guest
enable
Enables 802.1X authentication for clients on non-Dell
APs. Use no enable to disable stateful 8021.X
authentication.
— enabled
no
Negates any configured parameter. — —
server-group
<group>
Name of the group of RADIUS servers used to
authenticate the 802.1X users. See "aaa server-group" on
page 82.
— —
timeout <seconds>
Timeout period, in seconds. 1-20 10 seconds
Usage Guidelines
This command configures 802.1X authentication for clients on non-Dell APs. The controller maintains user session
state information for these clients.
Example
The following command assigns the employee user role to clients who successfully authenticate with the server group
corp-rad:
aaa authentication stateful-dot1x
default-role employee
server-group corp-rad
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide aaa authentication stateful-dot1x | 39