CLI Reference Guide
430 | logging level Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Parameter Description
l security: aaa, all, dot1x, firewall, ike, mobility, packet-trace, vpn, webserver
l system: all, configuration, messages, snmp, webserver
l user: all, captive-portal, dot1x, radius, vpn
l user-debug: all, configuration
l wireless: all
Usage Guidelines
There are eight logging severity levels, each with its associated types of messages. Each level also includes the levels
below it. For example, if you set the logging level to informational (6), all messages from level0 through level 5 (from
emergencies through notifications) are also logged. The warnings severity level is set by default for all message
categories.
Only the logging level warnings security subcat ids and logging level warnings security subcat ids-ap subcategories
are enabled by default. Other subcategories are not generated by default even their severity is warning or higher.
Issue the logging level command to enable all other message subcategories.
Example
The following command logs critical system messages.
logginglevelcritical system
Command History
Introduced in ArubaOS 2.5
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master and local
controllers