CLI Reference Guide

Command Description
to define the information elements advertised by an AP with 802.11k sup-
port enabled.
wlan tsm-req-profile
This command configures a TSM Report Request Profile.
Modified Commands
The following commands were modified in ArubaOS 6.2.
Command Parameter Description
aaa authentication mgmt
The option to enable mschapv2 was added.
aaa authentication via connection-profile
The following parameters were added:
l allow-whitelist-traffic
l auto-launch-supplicant
l banner-message-reappear
l enable-fips
l enable-supplicant
l whitelist
aaa authentication-server radius
The following support was added:
l enable-ipv6 and nas-ip6 parameters to specify an IPv6 host address
for the host parameter.
l mac-lowercase to send MAC addresses in lowercase format.
aaa authentication-server tacacs
IPv6 support was added for TACACS server. You can now specify an IPv6
host address for the host parameter.
copy
The following parameters were added:
l usb: partition <partition-number>
l usb: partition <partition-number> <filename>
firewall
The following parameters were added:
l enable-bridging
l prevent-dhcp-exhaustion
firewall cp
The following parameters were added:
l permit <ip-addr><ip-mask>
l deny <ip-addr>
l any
l host
l ftp, http, https, icmp, snmp, ssh, telnet and tftp
interface vlan ipv6 address
The nd parameter for configuring IPv6 neighbor discovery and IPv6 router
advertizement options was introduced.
ip mobile proxy
The re-home parameter is deprecated as the re-homing functionality is
no longer available.
mgmt-user
The rcp (Revocation Checkpoint) parameter was added. The rcp checks
the revocation status of the SSH user’s client certificate before permitting
access.
provision-apsch-mode-radio-0 | sch-
If you are provisioning an 802.11n-capable AP, issue the sch-mode-radio-
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide Introduction | 5