CLI Reference Guide

540 | rf optimization-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
rf optimization-profile
rf optimization-profile <profile-name>
clone <profile>
handoff-assist
low-rssi-threshold <number>
no ...
rssi-check-frequency <number>
rssi-falloff-wait-time <seconds>
Description
This command configures the RF optimization profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile. The name
must be 1-63 characters.
— “default”
clone
Name of an existing optimization profile from
which parameter values are copied.
— —
handoff-assist
Allows the controller to force a client off an AP
when the RSSI drops below a defined minimum
threshold.
— disabled
low-rssi-threshold
Minimum RSSI, above which deauth should never
be sent.
1-255 0
no
Negates any configured parameter. — —
rssi-check-frequency
Interval, in seconds, to sample RSSI. 9-255 0 seconds
rssi-falloff-wait-time
<seconds>
Time, in seconds, to wait with decreasing RSSI
before deauth is sent to the client. The maximum
value is 8 seconds.
0-8 0 seconds
Example
The following command configures an RF optimization profile:
(host) (config) #rf optimization-profile Angela1
(host) (RF Optimization Profile "Angela1") #rssi-falloff-wait-time 3
(host) (RF Optimization Profile "Angela1") #rssi-check-frequency 2
Command History
Version Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.4 The following parameters were deprecated:
l ap-lb-max-retries <number>