CLI Reference Guide

574 | show aaa authentication stateful-ntlm Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide

show aaa authentication stateful-ntlm

Description

This command displays configuration settings for the Stateful NTLM Authentication profile.Issue this command

without the <profile-name> option to display the entire Stateful NTLM Authentication profile list, including

profile status and the number of references to each profile. Include a profile name to display detailed Stateful NTLM

authentication configuration information for that profile.

Syntax

Parameter Description

<profile-name>

The name of an existing Stateful NTLM authentication profile.

Usage Guidelines

Issue this command to identify the default role assigned to users who have successfully authenticated using the NT

LAN Manager (NTLM) authentication protocol, the name of the group of windows servers used to authenticate

these users, and the NTLM authentication timeout period, in seconds.

Examples

The output of the example below shows two stateful NTLM authentication profiles, default and NTLMprofile1,

which are each referenced one time by other profiles. the Profile Status columns are blank, indicating that these

profiles are both user-defined. (If a profile is predefined, the value Predefined appears in the Profile Status column.)

(host) #show aaa authentication stateful-ntlm

Stateful NTLM Authentication Profile List

-----------------------------------------

Name References Profile Status

---- ---------- --------------

default 1

NTLMprofile1 1

Total:2

The following example displays configuration details for the stateful NTLM authentication profile “default”.

(host) #show aaa authentication stateful-ntlm default

Stateful NTLM Authentication Profile "default"

----------------------------------------------

Parameter Value

--------- -----

Default Role guest

Server Group default

Mode Disabled

Timeout 10 sec