CLI Reference Guide

Allow client to auto-upgrade Enabled
VIA tunneled networks N/A
Enable split tunneling Disabled
VIA Client WLAN profiles N/A
Allow client side logging Enabled
VIA IKE V2 Policy Default
VIA IKE Policy Default
Use Windows Credentials Enabled
Enable IKEv2 Disabled
Use Suite B Cryptography Disabled
IKEv2 Authentication method user-cert
VIA IPSec V2 Crypto Map default-ikev2-dynamicmap/10000
VIA IPSec Crypto Map default-dynamicmap/10000
Allow user to save passwords Enabled
Enable Supplicant Disabled
Enable FIPS Module Disabled
Auto-launch Supplicant Disabled
Lockdown All Settings Disabled
Domain Suffix in VIA Authentication Disabled
Enable Controllers Load Balance Disabled
Enable Domain Pre-connect Enabled
VIA Banner Message Reappearance Timeout(minutes) 60
VIA Client Network Mask 255.255.255.255
Validate Server Certificate Enabled
VIA Client DNS Suffix List N/A
VIA max session timeout 1440 min
VIA Logon Script N/A
VIA Logoff Script N/A
VIA Support E-Mail Address N/A
Maximum reconnection attempts 3
VIA external download URL N/A
Allow user to disconnect VIA Enabled
Content Security Gateway URL N/A
Comma seperated list of HTTP ports to be inspected
(apart from default port 80) N/A
Enable Content Security Services Disabled
Keep VIA window minimized Disabled
Block traffic until VPN tunnel is up Disabled
Block traffic rules N/A
The output of this command includes the following parameters:
Configuration Option Description
VIA servers
Displays the following information about the VIA server:
l Controller Hostname/IP Address : This is the public IP address or the DNS hostname of
the VIA controller. Users will connect to remote server using this IP address or the
hostname.
l Controller Internal IP Address: This is the IP address of any of the VLAN interface IP
addresses belongs to this controller.
l Controller Description: This is a human-readable description of the controller.
Client Auto-Login
Enable or disable VIA client to auto login and establish a secure connection to the
controller.
Default: Enabled
VIA Authentication
Profiles to provision
This is the list of VIA authentication profiles that will be displayed to users in the VIA
client.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show aaa authentication via connection-profile | 579