CLI Reference Guide

654 | show adp counters Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show adp counters
show adp counters
Description
Show Aruba Discovery Protocol (ADP) counters.
Syntax
No parameters.
Example
The following example shows the ADP counter table for the controller.
(host) #show adp counters
ADP Counters
------------
key value
--- -----
IGMP Join Tx 1
IGMP Drop Tx 0
ADP Tx 0
ADP Rx 0
The output of this command includes the following parameters:
Parameter Description
IGMP Join Tx
Number of Internet Group Management Protocol (IGMP) join requests sent by the
controller.
IGMP Drop Tx
Number of Internet Group Management Protocol (IGMP) drop requests sent by the
controller.
ADP Tx
Number of ADP responses sent to APs.
ADP Rx
Number of multicast and broadcast queries received from APs trying to locate the
master controller.
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers