CLI Reference Guide

672 | show ap arm scan-times Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap arm scan-times
show ap arm scan-times {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show AM channel scan times for an individual AP.
Syntax
Parameter Description
ap-name <ap-name>
Show channel scan data for an AP with a specific name.
bssid <bssid>
Show channel scan data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP’s
BSSID is usually the AP’s MAC address.
ip-addr <ip-addr>
Show channel scan data for an AP with a specific IP address. Enter the IP address in dotted-
decimal format.
Examples
The output of this command shows scan times for every channel on an AP with the IP address 10.15.10.37.
(host)# show ap arm scan-times ip-addr 10.15.10.37
Channel Scan Time
-----------------
channel assign-time scans-attempted scans-rejected dos-scans flags timer-tick
------- ----------- --------------- -------------- --------- ----- ----------
36 8579 349 0 0 DVACT 50598
40 2365 349 0 0 DVACT 50610
44 2495 349 0 0 DVACT 50621
48 9714 349 0 0 DVACT 50656
52 0 349 0 0 DA 50643
56 0 349 0 0 DA 50655
60 0 348 0 0 DA 50519
64 0 348 0 0 DA 50530
149 5546 348 0 0 DVACT 50542
153 2310 348 0 0 DVACT 50553
157 6094 348 0 0 DVACT 50565
161 3014 348 0 0 DVACT 50576
165 10538 348 0 0 DVACT 50587
1 4194 97 0 0 DVACT 50594
2 0 97 0 0 DAC 50604
3 0 97 0 0 DAC 50615
4 0 97 0 0 DAC 50627
5 0 97 0 0 DC 50638
6 4076 97 0 0 DVACT 50656
7 0 96 0 0 DAC 50538
8 0 97 0 0 DC 50549
9 0 97 0 0 DC 50561
10 0 97 0 0 DAC 50572
11 3710 97 0 0 DVACT 50583
D: Default, V: Valid, A: AP Present, C: Reg Domain Channel, O: DOS Channel, T:20MHZ Channel,
F: 40MHz Channel, L: Reg Domain 40MHz Channel (lower), U:
Reg Domain 40MHz channel (U)