CLI Reference Guide

762 | show ap enet-link-profile Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap enet-link-profile
show ap enet-link-profile [<profile>]
Description
Show a list of all Ethernet Link profiles.
Usage Guidelines
Include a profile name to display details for the specified Ethernet Link Profile, or omit the <profile> parameter to
display a list of all Ethernet Link profiles.
Example
This command shows the speed of the Ethernet interface and the current duplex mode for the Ethernet Link profile
“default”:
(host) #show ap enet-link-profile default
AP Ethernet Link profile "default"
----------------------------------
Parameter Value
--------- -----
Speed auto
Duplex auto
The output of this command includes the following parameters:
Parameter Description
Speed
The speed of the Ethernet interface. This value can be either 10 Mbps, 100
Mbps, 1000Mbps (1 Gbps), or auto (auto-negotiated).
Duplex
The duplex mode of the AP’s Ethernet interface. This value can be either full,
half, or auto (auto-negotiated).
Related Commands
Command Description Mode
ap enet-link-profile
This command configures an AP Ethernet link profile. Config mode
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers