CLI Reference Guide

Column Description
Num Matches
Number of times the running image version matched the flash image version after a
reboot.
Num Mismatches
Number of times the running image version did not match the flash image version
after a reboot. If the images do not match, the AP will upgrade to the flash image.
Bad Checksums
Number of bad checksum calculations due to an invalid or corrupted image file.
Image Load Status
Current status of the AP following an upgrade.
Done: This status indicates that the controller reset after the upgrade was
performed, or the upgrade was performed after the AP first registered with the
controller.
Completed: The AP was updated after it was registered to the controller, and after
the controller’s last reset. If AP shows a status of completed, it will also display the
time it took it update that AP.
In progress: The AP is currently updating its image.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap image version | 767