CLI Reference Guide

Parameter Description
Reception of LLDP PDUs Shows if LLDP PDU reception is enabled on the AP.
Transmit interval (seconds) The interval between LLDP TLV transmission seconds. The supported range is 1-3600
seconds and the default value is 30 seconds.
Transmit hold multiplier This value is multiplied by the transmit interval to determine the number of seconds to
cache learned LLDP information before that information is cleared.
If the transmit-hold value is at the default value of 4, and the transmit interval is at its
default value of 30 seconds, then learned LLDP information will be cached for 4 x 30
seconds, or 120 seconds.
Optional TLVs The AP sends the listed optional TLVs in LLDP PDUs.
802.1 TLVs The AP sends the listed 802.1 TLVs in LLDP PDUs. By default, the AP will send all 802.1
TLVs.
802.3 TLVs The AP sends the listed 802.3 TLVs in LLDP PDUs. By default, the AP will send all 802.3
TLVs.
LLDP-MED TLVs Lists the LLDP-MED TLVs the AP will send in LLDP PDUs. By default, the AP will not send
any LLDP-MED TLVs
LLDP-MED network policy
profile
Specifies the LLDP MED Network Policy profile to be associated with this LLDP profile.
Command History
Command introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system. Enable or Config mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide show ap lldp | 771