CLI Reference Guide

852 | show ap remote debug r1_key Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap remote debug r1_key
show ap remote debug r1_key [ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr>]
Description
This command displays all the r1 keys that are stored in an AP.
Syntax
Parameter Description
ap-name <ap-name>
Show debugging information for a specific AP.
bssid <bssid>
Show debugging information for a specific Basic Service Set Identifier (BSSID). The Basic
Service Set Identifier (BSSID) is usually the AP’s MAC address
ip-addr <ip-addr>
Show debugging information for an AP with a specific IP address by entering its IP address
in dotted-decimal format.
Examples
Use this command to view all the r1 keys that are stored in an AP. You can filter the output based on the AP name,
BSSID, or IP address.
(host) #show ap remote debug r1_key ap-name MAcage-105-GL
Stored R1 Keys
--------------
Station MAC Mobility Domain ID Validity Duration R1 Key
----------- ------------------ ----------------- ------
00:50:43:21:01:b8 1 3568 (32): 94 ff 18 0a 5f 47 8b 3e 95 2b
93 31 bd 44 58 fe fe 6a ad aa 1d d7 29 94 fb 5b 7c 15 76 66 d2 1f
Command History
Introduced in ArubaOS 6.2.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers