CLI Reference Guide

864 | show ap spectrum debug Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
show ap spectrum debug
show ap spectrum debug {channel-info|channel-quality|classify|classify-fft|device-
details|device-info|devices-seen} {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band
{2.4ghz|5ghz}
Description
This command saves spectrum analysis channel information to a file on the spectrum monitor.
Syntax
Parameter Description
channel-info
Save channel information for later analysis.
channel-quality
Save channel quality information for later analysis
classify
Save information on classification for later analysis.
classify-fft
Save information on classification and FFT data for later analysis.
device-details
Save device details for later analysis.
device-info
Save device information for later analysis.
devices-seen
Save information on devices seen by the spectrum monitor.
ap-name <ap-name>
Name of the spectrum monitor for which you want to view spectrum information.
ip-addr <ip-addr>
IP address of the spectrum monitor for which you want to view spectrum information.
freq-band 2.4ghz|5ghz
Save information for a specific radio type, either 2.4 GHz or 5 GHz.
Usage Guidelines
Use this command under the supervision of your Dell technical support representative to troubleshoot spectrum
analysis issues or errors.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Config mode on master or local
controllers
rf dot11a-radio-profilemodespectrum-
mode
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profilemodespectrum-
mode
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers