CLI Reference Guide

882 | show ap spectrum device-log Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Column Description
Signal Strength
Strength of the signal sent by the device.
Duty Cycle
Device duty cycle. This value represents the percent of time a signal is broadcast on a
specific channel or frequency.
Center Freq
Center frequency of the signal sent by the device.
Start Freq
Lowest signal frequency sent by the device.
End Freq
Highest signal frequency sent by the device.
Channels affected
Radio channels affected by the device signal.
Bandwidth
Amount of signal bandwidth used by the device, in kilohertz.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Config mode on master or local
controllers
rf dot11a-radio-profilemodespectrum-
mode
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
rf dot11g-radio-profilemodespectrum-
mode
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Config mode on master or local
controllers
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers