CLI Reference Guide

952 | show datapath Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Syntax
Parameter Description
acl id <id-name>
Displays datapath statistics associated with a specified ACL. The ACL index is
found in the show rights command.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP
application counters
Shows application counters and errors generated by applications running on a
particular AP. These include stateful firewall application layer statistics.
ap-name <ap-name>
Name of the AP.
ip-addr <ip-address>
IP address of the AP.
bridge
Shows bridge table entry statistics including MAC address, VLAN, assigned VLAN,
Destination and flag information for an AP.
ap-name <ap-name>
Name of the AP. Shows MAC address, VLAN, assigned VLANs, destination and
flags information.
counters
Shows datapath bridge table statistics such as current entries, high water mark,
maximum entries, total entries, allocation failures and max link length.
ip-addr <ip-address>
IP address of the AP. Shows MAC address, VLAN, assigned VLANs, destination
and flags information.
table <macaddr>
Displays the current high, maximum, and total number of bridge table entries for
the Dell controller.
bwm table
Shows bandwidth management table entry statistics such as CPU, contract,
Bits/sec, policed, available bytes, queued bytes and packets.
cp-bwm
Displays the data path CP bandwidth management table information.
crypto counters
Displays crypto parameter statistics including crypto, IPsec, PPTP, WEP, TKIP,
AESCCM encryption and decryptions, WEP CRC, crypto hardware, XSEC, DOT1X
and L2TP information.
debug
Displays datapath debug details. These are low-level datapath details.
dma counters
DMA counters are displayed.
eap
EAP termination statistics displayed.
opcode
Displays datapath debugging information. Use this command only under the
supervision of Dell technical support.
performance
Datapath performance counters. By default, combined statistics of all CPUs are
shown.
pkttrace-buffer
Packet trace buffer statistics.
trace-buffer
Debug trace-buffer tables are displayed.