Installation guide

Dell PowerConnect W-6000M3 Controller Module | Installation Guide 5
LED Status Indicators
Table 2 describes the W-6000M3 LEDs (show in Figure 5) and their function.
Figure 5 W-6000M3 Front Panel and LEDs
Table 2 W-6000M3 LED Behavior
LED Function Indicator Status
PWR Input Power Status On (Green) Power on
Off No power
STAT Module Status Indicator On (Green) Device is operational
On (Amber) Device is booting
On (Red) Device failed
Off Device is loading software
or no power
ACT Module Mode Indicator On (Green) Device in active mode
On (Yellow) Device in standby mode
Off Device has not determined
operating state or no
power
LNK/ACT Link Status Indicator On (Solid Green) Link has been established
On (Flashing Green) Port is transmitting or
receiving data
Off No link on port