User's Manual

ManualsBrandsDell ManualsComputer equipmentPowerConnect W-6000

1021

1026 | External User Management Dell Networking W-Series ArubaOS 6.4.x| User Guide

Strict Compliance Disabled

VLAN Mobility Disabled

Remote-AP Operation standard

Drop Broadcast and Multicast Disabled

Convert Broadcast ARP requests to unicast Disabled

Band Steering Disabled

WMM Traffic Management Profile N/A

l For wired users—Associate the XML API server to the AAA profile of the appropriate wired profile.

(host) (config) #aaa profile wiredusers

(host) (AAA Profile "wiredusers") #xml-api-server 10.11.12.13

(host) (AAA Profile "wiredusers") #!

(host) (config) #aaa authentication wired

(host) (Wired Authentication Profile) #profile wiredusers

(host) (Wired Authentication Profile) #show aaa authentication wired

Wired Authentication Profile

----------------------------

Parameter Value

--------- -----

AAA Profile wiredusers

l Unknown wired users—Associate the XML API server to the default-xml-api AAA profile.

The default-xml-api AAA profile is used only to add or authenticate new users.

The following example illustrates using the default-xml-api AAA profile.

(host) (config) #aaa profile default-xml-api

(host) (AAA Profile "default-xml-api") #xml-api-server 10.11.12.13

(host) (config) #show aaa profile default-xml-api

AAA Profile "default-xml-api" (Predefined (changed))

----------------------------------------------------

Parameter Value

--------- -----

Initial role logon

MAC Authentication Profile N/A

MAC Authentication Default Role guest

MAC Authentication Server Group default

802.1X Authentication Profile N/A

802.1X Authentication Default Role guest

802.1X Authentication Server Group N/A

RADIUS Accounting Server Group N/A

XML API server 10.11.12.13

RFC 3576 server N/A

User derivation rules N/A

Wired to Wireless Roaming Enabled

SIP authentication role N/A

Your controller is now ready to receive API calls from your XML API server.

Set up Captive Portal profile

Set up a Captive Portal profile with a login page that will redirect users to the external Captive Portal server.

(host) (config-role) #aaa authentication captive-portal captive-portal-auth

(host) (Captive Portal Authentication Profile "captive-portal-auth") #default-role

authenticated

(host) (Captive Portal Authentication Profile "captive-portal-auth") #login-page

https://10.11.12.13/cgi-bin/login.pl