User's Manual

(host)(config-subif)#
Enabling Linux DHCP Servers
The following is an example configuration for the Linux dhcpd.conf file. After you enter the configuration, you
must restart the DHCP service.
option serverip code 43 = ip-address;
class "vendor-class" {
match option vendor-class-identifier;
}
.
.
.
subnet 10.200.10.0 netmask 255.255.255.0 {
default-lease-time 200;
max-lease-time 200;
option subnet-mask 255.255.255.0;
option routers 10.200.10.1;
option domain-name-servers 10.4.0.12;
option domain-name "vlan10.aa.mycorpnetworks.com";
subclass "vendor-class" "ArubaAP" {
option vendor-class-identifier "ArubaAP";
#
# option serverip <loopback-IP-address-of-master-controller>
#
option serverip 10.200.10.10;
}
range 10.200.10.200 10.200.10.252;
}
Dell Networking W-Series ArubaOS 6.4.x | User Guide DHCP with Vendor-Specific Options | 1059