User's Manual

149 | Network Configuration Parameters Dell Networking W-Series ArubaOS 6.4.x| User Guide
6. If you selected Port in step 4, select the ports you want to associate with the VLAN from the Port
Selection window.
or
If you selected Port-Channel in step 4, click the Port-Channel ID drop-down list, select the specific
channel number you want to associate with the VLAN, then select the ports from the Port Selection
window.
7. Click Apply.
In the CLI
Use the following commands:
(host)(config) #vlan <id>
(host)(config) #interface fastethernet|gigabitethernet <slot>/<port>
(host)(config-if) #switchport access vlan <id>
Creating Bulk VLANs In the WebUI
1. To add multiple VLANs at one time, click Add Bulk VLANs.
2. In the VLAN Range pop-up window, enter a range of VLANs you want to create at once. For example, to
add VLAN IDs numbered 200-300 and 302-350, enter 200-300, 302-350.
3. Click OK.
4. To add physical ports to a VLAN, click Edit next to the VLAN you want to configure and click the port in the
Port Selection section.
5. Click Apply.
In the CLI
Use the following commands:
(host)(config) #vlan
(host)(config) #vlan range 200-300,302-350
Creating a VLAN Pool
You can create, update, and delete a VLAN pool. Each VLAN pool has a name and needs to have one or more
VLANs assigned to it. The following configurations create a VLAN Pool named mygroup. It has the assignment
type Even, and VLAN IDs 2, 4 and 12 are assigned to this pool.
ArubaOS supports maximum of 256 VLANs per VLAN Pool.
Using the WebUI
1. Navigate to Configuration > Network > VLANs.
2. Select the VLAN Pool tab to open the VLAN Pool window.
3. Click Add.
4. In the VLAN Name field, enter a name that identifies this VLAN pool.
5. In the Assignment Type field, select Hash or Even from the drop-down list. See Distinguishing Between
Even and Hash Assignment Types on page 150 for information and conditions regarding Hash and Even
assignment types.