User's Manual

274 | 802.1X Authentication Dell Networking W-Series ArubaOS 6.4.x| User Guide
b. For VLAN, select 63.
c. Click Apply.
6. Navigate to the Configuration > Wireless > AP Configuration page.
7. In the AP Group list, click Edit for the second-floor.
8. In the Profiles list, select Wireless LAN and then Virtual AP.
9. Select guest from the Add a profile drop-down list. Click Add.
10.Click Apply.
In the CLI
Use the following commands to configure the Guest WLAN:
(host)(config) #wlan ssid-profile guest
essid guest
wepkey1 aaaaaaaaaa
opmode static-wep
(host)(config) #wlan virtual-ap guest
vlan 63
ssid-profile guest
(host)(config) #ap-group first-floor
virtual-ap guest
(host)(config) #ap-group second-floor
virtual-ap guest
Configuring the Non-Guest WLANs
You create and configure the SSID profile “WLAN-01” with the ESSID “WLAN-01” and WPA TKIP encryption. You
need to create and configure two virtual AP profiles: one with VLAN 60 for the first-floor AP group and the
other with VLAN 61 for the second-floor AP group. Each virtual AP profile references the SSID profile “WLAN-
01” and the previously-configured AAA profile aaa_dot1x.
In the WebUI
1. Navigate to the Configuration > Wireless > AP Configuration page.
2. In the AP Group list, click Edit for the first-floor.
3. In the Profiles list, select Wireless LAN and then Virtual AP.
4. To configure the WLAN-01_first-floor virtual AP:
a. Select NEW from the Add a profile drop-down list. Enter WLAN-01_first-floor, and click Add.
b. In the Profile Details entry for the WLAN-01_first-floor virtual AP profile, select the aaa_dot1x AAA
profile you previously configured. A pop-up window displays the configured AAA profile parameters.
Click Apply.
c. From the SSID profile drop-down list, select NEW. A pop-up window allows you to configure the SSID
profile.
d. Enter WLAN-01 for the name of the SSID profile.
e. For Network Name, enter WLAN-01.
f. For Network Authentication, select WPA.
g. Click Apply.
h. At the bottom of the Profile Details page, click Apply.
5. Click on the WLAN-01_first-floor virtual AP name in the Profiles list or in Profile Details to display
configuration parameters.