User's Manual

402 | Virtual APs Dell Networking W-Series ArubaOS 6.4.x| User Guide
bkup-lms-ip 2.2.2.2
!
(host)(config) #ap-group "THRHQ1-STANDARD"
virtual-ap "THR-VIRTUAL-AP-PROFILE-WPA2"
(host)(config) #ap-system-profile "THR-AP-SYSTEM-PROFILE"
Associating a Virtual AP Profile to an AP or AP Group
Use the following procedures to associate a virtual APprofile to an AP or group of APs.
In the WebUI
1. Navigate to the Configuration > Wireless > AP Configuration page.
2. Do one of the following:
l To associate the Virtual APprofile to a single AP, click the AP specific tab, and select the AP.
l To associate the Virtual APprofile to an APgroup, click the AP Group tab, and select the AP Group.
3. In the Profiles list, expand the Wireless LAN menu.
4. Select Virtual AP. The Profile Details window dislays the Virtual AP profiles currently associated to the AP or
AP group.
5. Click the Add a Profile drop-down list and select a new Virtual AP profile to associate to the AP. You can
associate multiple APprofiiles to an AP, but each virtual AP profile must reference a SSID profile with a
different network name (SSID).
6. Click Apply
Although you can create mutliple Virtual AP profiles that reference a single SSID profile, only one of these profiles
can be applied to an AP or AP group.
In the CLI
(host) (config) ap-group <ap-group>
virtual-ap <vap-profile>
(host) (config) ap-name <ap-name>
virtual-ap <vap-profile>
Excluding a Virtual AP Profile
You can exclude one or more virtual AP profiles from an individual AP. This prevents a virtual AP, defined at the
AP group level, from being applied to a specific AP. For example, you can apply the virtual AP profile that
corresponds to the “Corpnet” SSID to the “default” AP group. If you do not want the “Corpnet” SSID to be
advertised on the AP in the lobby, you can specify the virtual AP profile that contains the “Corpnet” SSID
configuration be excluded from that AP.
In the WebUI
1. Navigate to the Configuration > Wireless > AP Configuration > AP Specific page.
2. Do one of the following:
l If the AP you want to exclude is included in the list, click Edit for the AP.
l If the AP does not appear in the list, click New. Either type in the name of the AP, or select the AP from
the drop-down list. Then click Add.
3. Select Wireless LAN under the Profiles list, then select Excluded Virtual AP.